Transmaterial » Blog Archive » Elumin8


feature, light — By Blaine Brownell on August 23, 2009 at 11:22 am

Elumin8 technology consists of applying electricity to copper dipped in zinc sulfate ink, which then emits light. This is applied using a silkscreen process to an indium tin oxide–splattered substrate. In essence, a LEC, or light emitting capacitor, is created.

The light emitted is cold, since the medium it is applied to is typically thin, such as a polyester substrate. This substrate is flexible and can be fabricated into complex shapes. The light is emitted in a uniform fashion across a given surface up to an area of approximately 3.5m2. No ultra violet rays are emitted.

Electroluminescent lights are driven by an alternating electric field. When alternating current is applied to the ink, the electrons within the phosphor ink are excited by the intense electric field and become highly energized. This phenomenon is known as excitation. Light is emitted once the excited electrons return to a stable state. As excitation takes place whenever the direction of the electron field changes, light is emitted twice per cycle when alternating current is applied.

Standard EL lamps diminish in intensity over time and have a half-life (to fifty percent of luminosity) of approximately 3,500 hours of continuous use. The higher the current, the earlier that half-life is reached. A four hundred hertz input is more than sufficient for most uses. Elumin8 has developed new phosphors and drivers that can significantly increase the half-life of lamps.


via Transmaterial » Blog Archive » Elumin8.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s